Preparation
- This manual describes the transportation, storage, installation, starting, operation condition, maintenance, troubleshooting and repairing of this product.
- The installation of this machine should be operated by professional workers.
- Please obey this maintenance instruction
- Before using this machine, please read this instruction manual and understand it fully.
- Any questions, please contact the manufacturer or distributor.
Precautions on safety
- Pls confirm the machine voltage, frequency to prevent the accident.
- This machine is in power system of single-phase three-wire, and the yellow and green wire is protective earth wire which should be grounding and could not be removed.
- The power cord should be protected from pressing, pulling, and should be winded when it is not used.
- Do not touch the electrical devices inside the machine after the power is turned on.
- Do not touch any driving parts to avoid injury when the machine is in operation.
- Do not open the machine hull, protection cover etc. when machine is on to avoid pinching, scalding or electric shock.
- Do not touch the heating blocks to prevent from burns.
- When the machine is repaired, please proceed when the heating blocks are fully cool to avoid burns.
- Do not use the machine in corrosive and humid environments.
- Do not optionally replace parts on the machine.
- Keep the inside and outside of the machine clean and remove the surface adhesive materials from the Teflon belt in time.
- Fill and exchange oil in worm-gear case regularly, and oil gear and sprocket (YP7408 semi-liquid gear oil).
When the machine is not in use, the power supply should be switched off.
Keep this manual properly for easy reference in the future.
For example:
|
|
Danger! There may be severe accidents or death if this precaution is ignored! |
|
|
Warning! There may be severe accidents or deaths if this precaution is ignored! |
 |
Warning! There may be personal injury or property loss if this precaution is ignored! |